Step-by-step guide on how to change a Samsung Fridge Filter

Is it time to replace your Samsung fridge filter but you don't know where to start?

Samsung are by far one of the leading manufacturers of refrigerators, so it's no surprise that their genuine replacement filters are so popular. Not only do they provide a premium level of filtration, but you also know you are ensuring your warranty isn't voided if you have a newer model.

With hundreds of different Samsung refrigerator models out there and several different filters from the Aqua-Pure range to the newer designs, it can sometimes difficult to know the correct way of replacing your filter and resetting the filter light. 

Thats why we've put together this step-by-step guide to walk you through your Samsung fridge filter replacement including how to reset the filter indicator light, so you can have a hassle-free filter change no matter which model you have.

Filters covered in this guide:

1. Samsung DA29-00003F
2. Samsung DA29-00003G
3. Samsung DA29-10105J
4. Samsung DA29-00020B
5. Samsung DA29-17376B
6. Resetting The Filter Indicator Light (All Models)

Using an alternative brand or different filter? Contact us and we'll be happy to help you through the fridge filter replacement process.

1 & 2. Samsung DA29-00003F (HAFIN1) & DA29-00003G (HAFIN2) Filter Replacement Instructions:

1. Remove your old fridge filter by firmly twisting it counterclockwise to unlock it and gently remove it.
2. With all the packaging removed, gently push and turn your new filter clockwise into the housing until the filter padlock symbol matches up to the centre mark on the filter housing.
3. If the padlock does not match up, retry steps 1 and 2, ensuring you are firm but not forceful when twisting your new filter into the housing.

Having difficulty removing the filter? Try these steps:

1. A build-up of water pressure in the system can make it difficult to remove the filter. To alleviate this, turn off the water supply and dispense as much water as possible from the fridge.
2. If necessary, you may need to remove the shelves immediately underneath the filter to provide room to pull with more force.

3. Samsung DA29-10105J (HAFEX/EXP) Filter Replacement Instructions:

1. Turn off your cold-water supply.
2. Place a container underneath the filter in case any water spills, and then disconnect your old water filter by pulling the tubing out from each end. You may need to push the fitting at the end of the filter to release the tubing.
3. Remove the black caps and red collet clips from each end of your new DA29-10105J filter.
4. Note the correct flow direction by looking at the top right-hand
5. corner of the label, and then re-connect the tubing by firmly inserting into the right end of each filter.
6. Replace red collet clips to ensure tubing is secure.
7. Insert the new filter into its mounting clip.
8. Turn on the water supply and check for leaks. If leaks occur, turn off the water and repeat steps 1-6.
9. Flush the new filter for 5 minutes or until water runs clear.
10. Follow the steps for resetting the Samsung fridge filter light below. 

4. Samsung DA29-00020B (HAF-CIN/EXP) Filter Replacement Instructions:

1. Remove your old DA29-00020B fridge filter by firmly twisting it counterclockwise and pulling it out from the socket.
2. With the plastic wrapper removed, insert your new filter into the socket.
3. With a quarter turn, twist it clockwise firmly until secure and the locking arrow is aligned with the padlock. You may hear a noise caused by pressure release as the filter locks into place, which is normal.
4. Flush the filter for 5 minutes, or until water runs clear.

5. Samsung DA97-17376B (HAF-QIN/EXP) Filter Replacement Instructions:

1. Remove your old DA97-17376B fridge filter by firmly twisting it counterclockwise and pulling it out from the socket.
2. With the plastic wrapper removed, insert your new filter into the socket and with a quarter turn, twist it clockwise firmly until secure and the locking arrow is aligned with the padlock. You may hear a noise as the filter locks into place due to pressure being released, which is normal.
3. Flush the filter for 5 minutes or until water runs clear.
4. Follow the steps for resetting the Samsung fridge filter light below.

6. Resetting the Filter Light on a Samsung Refrigerator

On newer Samsung refrigerators, the filter indicator light turns orange after five months or when your filter reaches 90% capacity. The indicator light will then turn red after six months or once the filter has reached 100% capacity.

Depending on the model you have the light can be either green or blue.

Resetting the filter light on your Samsung fridge is usually straightforward. 

1. First, find the multi-function button on your screen display that controls the filter indicator. The alternative function is usually written under the button label.
2. This may be labelled as ‘Alarm’, ‘Water’ ‘Energy Saver’ ‘Fridge’, ‘Power Cool’ ‘Ice type’, ‘Child Lock’, ‘Moisture Control’ or a combination of these.
3. Then press and hold the button(s) for 3 seconds until the light changes.
4. That’s it! Enjoy your freshly filtered water.

Still having issues?

Contact us today and we'll be happy to help. Here at Filter Flair we stock the complete range of Samsung fridge filters, so whatever refrigerator model you have we've got you covered.

Samsung filters are available as a one-off purchase or with the option to Subscribe & Save, which not only saves you money on replacements but means you don't need to remember when it's time to replace your filter!